ผู้ช่วยศาสตราจารย์ ดร.สุรังศี เดชเจริญ
Asst.Prof.Dr. Surangsee Dechjarern
surangsee.d@eng.kmutnb.ac.th
Scopus Author ID: –
Research Gate: –
ข้อมูลทั่วไป
งานสอน และงานวิจัย
ผลงานทางวิชาการ
ข้อมูลทั่วไป
Education/ประวัติการศึกษา
Oct’97 – Oct’02 Imperial College London, UK
PhD. in Mechanical Engineering (Computational Aid Engineering)
Research focus: The numerical and experimental studies of friction and wear performance of automatic-coated-cutting tools with various surface topologies.
Oct’94 – Sept’97 Imperial College London, UK B.Eng (Hon) in Mechanical Engineering.
Profiles
Areas of Research
งานสอน และงานวิจัย
Teaching & Professional Activities / งานสอน
Current Research / งานวิจัยปัจจุบัน
–
- Granted by Faculty of Engineering, KMITNB, Title: “3D numerical study of coated cutting tool”, Start from August 2003 to July 2004 (Head of the Project).
- Granted by TRF (section 5), Title: “Exper development and technology transfer for research center in aluminum extrusion die design”, From August 2004 – January 2006. (Head of the Project)
- Granted by TRF (section 6), Title: “3D numerical study of wear of coated cutting tools”, From August 2004 – July 2005 (Head of the Project).
- Granted by Thailand Automotive institution, Title: “Finite Element Analysis of Splitting and Wrinkling Suppression in Stamping Process of Extension”, From March 2004 – August 2004 (Head of the Project).
- Granted by Thailand Automotive institution, Title: “Splitting and Wrinkling Suppression of Engine-Supporter Stamping Using Finite Element Analysis”, From March 2004 – August 2004. (Head of the Project).
- Granted by Thai-German Institute, Title: “Precision die design for sheet metal forming” From March (Head of the Project). From June 2005- May 2007 (Head of the Project).
- Granted by NSTDA, Title: “Real-time cutting tool wear monitoring” From June 2008- May 20010 (Head of the Project).
- Granted by NSTDA, Title: “Design of bus body structure for crash worthiness” From June 2008- May 2010 (Head of the Project).
- Grant by Department of Intellectual property, Thailand, Title: “patent research and examination”, From October 2011- Sept 2012 (Head of the Project).
- Granted by Faculty of Engineering, KMITNB, Title: “Design of anchor to increase holding force using Finite element modeling and Taguchi method”, Start from August 2012 to July 2013 (Head of the Project).
- Granted by Sirindhorn National Medical Rehabilitation Centre, Thailand, Title: “Knee alignment setting for ISO 10328 standard structural testing”, From October 2012 – September 2013 (Head of the Project).
- Grant by Department of Intellectual property, Thailand, Title: “patent research and examination”, From December 2013- Sept 2014 (Head of the Project).
- Granted by Department of Transportation, Thailand, Title: “Software development for Bus stability design based on center of gravity and 30 degree tilt angle” From March 2014-January 2015 (Head of the Project).
- Grant by Department of Intellectual property, Thailand, Title: “patent research and examination”, From Oct 2014 – August 2015 (Head of the Project).
- Grant by Department of Intellectual property, Thailand, Title: “patent research and examination”, From Feb 2016 – August 2016 (Head of the Project).
- Granted by Thailand research fund (industrial section, พวอ. ป.เอก), Title: “Innovative spinning process for thin-wall can and cylindrical container”, July 2016 – June 2019 (Head of the Project).
- Granted by Thailand research fund (industrial section, พวอ. ป.โท), Title: “Innovative Knee implant based in ISO standard”, July 2016 – June 2018 (Head of the Project).
- Granted by Thailand super Cluster: Title “การปรับปรุงพัฒนาเครื่องกดรวมแกนลูกกระสุนพร้อมระบบตรวจติดตามสภาพการใช้งานอัตโนมัติ”, Oct 2016 – Sept 2017 (Head of the Project).
- Granted by Thailand super Cluster: Title “การยืดอายุการใช้งานของแม่พิมพ์ (punch-die) และการศึกษาความเป็นไปได้ในการลดขั้นตอนการในการรีดขึ้นรูปปลอกกระสุน”, Oct 2016 – Sept 2017 (Head of the Project).
- Granted by Thailand super Cluster: Title “การพัฒนาเครื่องตรวจสอบและคัดแยกปลอกกระสุนโดยอัตโนมัติ”, Oct 2016 – Sept 2017 (researcher).
- Granted by สำนักวิจัยระบบสาธารณสุข (สวรส) “Research and prototype of the semi-automatic patient positioning pillow during Tracheal Intubation”, Oct 2016 – Sept 2018 (Head of the Project).
- Granted by สวทน/วช งบบูรณาการ 61 “โครงการส่งเสริมการพัฒนาเครื่องมือทดสอบสำหรับงานรับรองมาตรฐานผลงานวิจัยพัฒนาและการรับรองมาตรฐานห้องทดสอบตาม ISO 17025 TSTEC.org (Thailand Standard Testing Equipment and Center)
Academic Service / บริการวิชาการ
ผลงานทางวิชาการ
Publication
- Dechjarern S., Hibberd, R. (2004), Numerical study of tribological effect on machining performance, The 17th National Conference on Mechanical Engineering, Thailand
- Dechjarern S., Hibberd, R. (2004), Effects of surface roughness on friction and wear behavior of coated cutting tools: experimental approach, International Conference on Tribology in Manufacturing Processes, 36 No.2, Denmark.
- Dechjarern S., Hibberd, R. (2004), Effects of surface roughness on friction and wear behavior of coated cutting tools: numerical approach, International Conference on Tribology in Manufacturing Processes, 36 No.2, Denmark.
- M. Kamonrattanapisut and S. Dechjarern, ”Spring Back Analysis of U-Bending Process Using 3D Finite Element Model”, การประชุมวิชาการวิทยาศาสตร์และวัสดุแห่งประเทศไทยครั้งที่ 3, กรุงเทพฯ, 10-11 สิงหาคม 2547
- S. Dechjarern, “3D finite element investigations of the influence of tool geometry on wear of coated cutting tools” การประชุมวิชาการข่ายงานวิศวกรรมอุตสาหการ ครั้งที่ 13 (The 13th IE-Network conference 2004), เชียงใหม่, 20-22 ตุลาคม 2547
- Surangsee Dechjarern, Wear model of coated cutting tools using finite element analysis, In the Proceedings of the 9th Annual National Symposium on Computational Science and Engineering, Faculty of Science, Mahidol University, Bangkok Thailand, 23-25 March 2005.
- Jaisue, S., Carmai, J., Pitakthapanaphong, S, Dechjarern , S., 2005, 3D finite element analysis of metal flow in hot aluminium extrusion of T-shape profile with offset pocket, In the Proceedings of the 9th Annual National Symposium on Computational Science and Engineering, Faculty of Science, Mahidol University, Bangkok Thailand, 23-25 March 2005.
- M. Kamonrattanapisut and S. Dechjarern, ”Optimization of Process Parameters in Sheet Metal Forming Using FEM”, In the Proceedings of the 19th conference of mechanical engineering network of Thailand, Phuket, Thailand 19-21 October 2005.
- A. Pomsawan, S. Pitakthapanaphong, S. Dechjarern, Study of Effects of Pocket Die Dimension on Velocity in Extrusion of Aluminum 6063, In the Proceedings of the 19th conference of mechanical engineering network of Thailand, Phuket, Thailand 19-21 October 2005.
- Jaisue, S., Carmai, J., Pitakthapanaphong, S, Dechjarern , S., 2005. Finite element study of effect of offset pockets on metal flow in aluminium extrusion. In the Proceedings of the 19th conference of mechanical engineering network of Thailand, 19-21 October 2005.
- J. Carmai, S. Pitakthapanaphong, S. Sechjarern, 3D finite element analysis of metal flow in hot aluminium extrusion of T-shaped profile with various offset pockets, Journal of Achievements in materials and manufacturing engineering, 31, 2008
- S. Dechjarern, 3D finite element investigations of influence of tool rake angle on the cutting performace, Austrilan Journal of Mechanical Engineering, 2009; 7: p53-60
- ธนกฤต พงษ์รักษา, สุรังศี เดชเจริญ, เพ็ญศิริ ทองผดุงโรจน์, การตรวจติดตามการสึกหรอของดอกสว่านในขณะตัดเฉือนโดยใช้สัญญาณกระแสไฟฟ้า, In the Proceedings of the 24th conference of mechanical engineering network of Thailand, 20-22 October 2010.
- วีรพงศ์ จุลศรี, สุรังศี เดชเจริญ, การออกแบบและวเคราะหโครงสรางความแขงแรงในการชนของรถบสโมบายดวยระเบยบวธไฟไนเอลเมนต, In the Proceedings of the 25th conference of mechanical engineering network of Thailand, October 2011.
- S. Dechjarern, E.P. Busso, Effect of rake angle on wear of coated cutting tools, The 2011 International Conference of Manufacturing Engineering and Engineering Management, London, UK, 2011
- S.Dechjarern, M. Kamonrattanapisut, Sheet metals forming die design using finite element analysis and the taguchi method, International Conference on Future Mechanical Engineering and Materials Engineering (MEME 2014), June 21-22, 2014, London, UK
- S. Dechjarern, M. Kamonrattanapisut, Sheet metals forming die design using finite element analysis and the taguchi method, Applied Mechanics and material, 2014
- Thanapat Sangkharat and Surangsee Dechjarern, Influence of process parameters on spinning force using finite element analysis and the Taguchi method, Key Engineering Materials, 659, 2015, p.666-670.
- Piyapat Chuchuay, Surangsee Dechjarern, Parametric study of influence of assembly and design on the center of gravity of public buses, Applied Mechanics and material, 2016
- Pavinee Tongsrinak, Venus Panichnok, Surangsee Dechjarern, Studying of blanking process with V-ring using finite element and Taguchi Method, Key Engineering Materials, Jan 2017
- Suwattanarwong Phanphet 1*, Surangsee Dechjarern2*, Sermkiat Jomjanyong, Above-Knee Prosthesis Design Based on Fatigue Life using Finite Element Method and Design of Experiment, Medical engineering and physics, *Accepted-2Jan2017*
- Pensiri Tongpradungroch, Surangsee Dechjarern2Comparative Burr Heights Formed on S50C and SS400 Steel in Drilling Process, Material Today Proceeding, 2017
- Thanapat Songka, Surangsee Dechjarern2, International Conference on the Technology of Plasticity, ICTP 2017, UK . Spinning Process Design Using Finite Element Analysis and Taguchi Method., Procedia Engineering, 2017.